0
0
0 results
iTeroED

The list is empty right now.

0
0
Filters
clear all

Content Content
Full mouth rehabilitation and restoration
Chairside dentistry
Full edentulous denture
Smile makeover
3D printing applications
Orthodontics
Pre-alignment with restorative
Patient communication & practice growth
Dental implants
iTero applications iTero applications
iTero™ NIRI technology (Near Infra-Red Imaging)
iTero™ TimeLapse technology
iTero™ Occlusogram
Scan report
Invisalign® Outcome Simulator
Invisalign® Outcome Simulator Pro
Invisalign® Progress Assessment tool
MyiTero™ portal
Apply
0 results
iTeroED

The list is empty right now.

How to change the wand cable – iTero Element™ 2 and iTero Element™ Flex

1. Power off the scanner and unplug the wand cable from behind the screen (or hub if it is a Flex model) - refer to the location of the cable here.

2. Press the button on both sides of the wand and pull out the wand cable.

3. Plug in the new wand cable to the base of the wand.

4. Plug in the new wand cable to the base (or hub if it is a Flex model).

5. Power on the scanner and perform a test scan to ensure all are working well.